SIGLENT’s SDS2000X Plus series Digital Storage Oscilloscopes are available in bandwidths of 350 MHz, 200 MHz and 100 MHz, have a maximum sample rate of 2 GSa/s, maximum record length of 200 Mpts/ch, and up to 4 analog channels + 16 digital channels mixed signal analysis ability.

The SDS2000X Plus series employs SIGLENT’s SPO technology with a maximum waveform capture rate of up to 120,000 wfm/s (normal mode, up to 500,000 wfm/s in Sequence mode), 256-level intensity grading display function plus a color temperature display mode. It also employs an innovative digital trigger system with high sensitivity and low jitter. The trigger system supports multiple powerful triggering modes including serial bus triggering. History waveform recording, Sequence acquisition, Search and Navigate functions allow for extended waveform records to be captured, stored, and analyzed. An impressive array of measurement and math capabilities, options for a 50 MHz waveform generator, as well as serial decoding, mask test, bode plot, and power analysis are also features of the SDS2000X Plus. A 10-bit acquisition mode helps to satisfy applications which require more than 8-bit resolution.

The large 10.1’’ capacitive touch screen supports multi-touch gestures, while the remote web control, mouse and external keyboard support greatly improve the operating efficiency of the SDS2000X Plus.

Key Features

◆ 350 MHz, 200 MHz, 100 MHz models with real-time sample rate up to 2 GSa/s. A 500 MHz bandwidth upgrade option is available for 350 MHz models.

◆ SPO technology

    • Waveform capture rates up to 120,000 wfm/s (normal mode) and 500,000 wfm/s (sequence mode)

    • Supports 256-level intensity grading and color temperature display modes

    • Record length up to 200 Mpts/ch, 400 Mpts in total for all 4 channels

    • Digital trigger system

◆ Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern and Video (HDTV supported). Trigger zone helps to simplify advanced triggering

◆ Serial bus triggering and decoder, supports IIC, SPI, UART, CAN, LIN (Standard) and CAN FD, FlexRay, IIC, and MIL-STD-1553B (optional) protocols

◆ Low background noise, supports 0.5 mV/div to 10 V/div voltage scales

◆ 10-bit mode provides higher resolution and lower noise

◆ Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 90,000), according to trigger conditions set by the user, with a very      small dead time between segments to capture the qualifying event

◆ History waveform record (History) function for up to 90,000 triggered waveforms (frames)

◆ Automatic measurement function on 50+ parameters, supports statistics with histogram and trend

◆ Two Math traces, support 2 Mpts FFT, +, -, x, ÷, d/dt, ∫dt, √, average, ERES, and formula editor

◆ Abundant data processing and analysis functions such as Search, Navigate, Mask Test, Bode plot, Power Analysis (optional) and Counter

◆ 16 digital channels (optional)

◆ Built-in 50 MHz waveform generator (optional)

◆ Large 10.1” TFT-LCD display with 1024×600 resolution; Capacitive touch screen supports multi-touch gestures

◆ Multiple interfaces: USB Host, USB Device (USBTMC), LAN（VXI-11/Telnet/Socket）, Pass/Fail, Trigger Out

◆ Supports SCPI remote control commands

◆ Supports Multi-language display and embedded online Help

Characteristics 

                          

                       

                                                500 MHz bandwidth (at 2 GSa/s sample rate with 500 MHz bandwidth option).

 

Up to 120,000 wfm/s waveform update rate

                                Record Length of up to 200 Mpts/ch

               

                                10-bit Mode

                                                10-bit mode combined with Zoom shows you more details and less noise on the waveform.

                                Multiple Trigger Functions

                                       Trigger Zone

                                           Trigger Zone is available for advanced triggering.

                                             Measurements for All relevant Parameters and Parameter Statistics

                                             Advanced Math Function

                                             Hardware accelerated FFT up to 2 Mpts. This provides high frequency resolution with fast refresh rate.  

                                               The FFT function also supports a variety of window functions so that it can adapt to different spectrum measurement needs. 

                                               Three modes (Normal, Average and Max hold) can satisfy different requirements for observing the power spectrum. 

                                               Auto peak detection and markers are supported.

                                History Mode

                                                  History function records up to 90,000 triggered waveforms (frames). This is done continuously in the background, 

                                                  so the history waveforms can be played back at any time to find and analyze past events. Serial decode, 

                                                  zoom and cursors measurements can be used. 

                                  Sequence Mode

                                              Segmented memory collection will store the waveform into multiple memory segments (up to 90,000) and each segment will store 

                                              a triggered waveform together with the dead time information. The interval between segments can be as small as 2 µs. 

                                              All segments can be played back at an arbitrary framerate using the History function. 

                                Search and Navigate

                                                The SDS2000X Plus can find events within a record and history based on user specified trigger conditions. 

                                                Navigate browses through Events flagged by the Search, plays back history frames or continuously moves the delay position on 

                                                long records (useful in zoom view).

                                Serial Bus Decode

                                               In addition to the decoder lanes correlated to the waveform, bus protocol information can be displayed in tabular form. 

                                               IIC, SPI, UART, CAN, LIN, CAN FD, FlexRay, IIS and MIL-STD-1553B are supported. 

Complete Connectivity

USB Host, USB Device (USBTMC), LAN (VXI-11/Telnet/Socket), Auxiliary Output (Pass/Fail, Trigger Out)

Ordering Information

※ 자세한 사항은 'DataSheet'나 'Manual'를 참조해 주세요.