고객의 가치창조와 고객의 지속성장을
위하여 우리는 최선을 다합니다.

HOME >상품상세화면
디지털오실로스코프 SDS5000X시리즈SDS5032X/SDS5034X/SDS5052X/SDS5054X/SDS5102X/SDS5104X
  • 디지털오실로스코프 SDS5000X시리즈SDS5032X/SDS5034X/SDS5052X/SDS5054X/SDS5102X/SDS5104X

디지털오실로스코프 SDS5000X시리즈

350MHz/500MHz/1.0GHz, 5 GSa/s; 250M memory, 2CH/4CH, 10.1'' Touch Screen
0원 / 주문시결제(선결제) 조건별배송 지역별추가배송비
방문 수령지 : 서울특별시 구로구 디지털로 288 (대륭포스트타워1차) 1404호


Product Overview 

SIGLENT’s SDS5000X series Digital Storage Oscilloscopes are available in bandwidths of 1 GHz, 500 MHz and 350 MHz, have a maximum sample rate of 5 GSa/s, maximum record length of 250 Mpts, and display up to 4 analog channels + 16 digital channels mixed signal analysis ability.

The SDS5000X series employs Siglent’s SPO technology with a maximum waveform capture rate of up to 110,000 wfm/s (normal mode, up to 480,000 wfm/s in Sequence mode), 256-level intensity grading display function plus a color temperature display mode. It also employs an innovative digital trigger system with high sensitivity and low jitter. The trigger system supports multiple powerful triggering modes including serial bus triggering. History waveform recording, Sequence acquisition, Search and Navigate functions allow for extended waveform records to be captured, stored, and analyzed. An impressive array of measurement and math capabilities, options for a 25 MHz arbitrary waveform generator, as well as serial decoding are also features of the SDS5000X. 

The large 10.1” display capacitive touch screen supports multi-touch gestures, with the addition of user-friendly one-button design for most commonly used functions, can greatly improve the operation effciency of the SDS5000X. It also supports mouse and external keyboard control. 

Key Features

1 GHz, 500 MHz, 350 MHz models with real-time sample rate up to 5 GSa/s 

SPO technology 

· Waveform capture rates up to 110,000 wfm/s (normal mode), and 480,000 wfm/s (sequence mode) 

· Supports 256-level intensity grading and color temperature display modes 

· Record length up to 250 Mpts 

· Digital trigger system

Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified and Video (HDTV supported). Trigger zone helps to simplify advanced triggering 

Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S and MIL-STD-1553B 

Low background noise, supports 0.5 mV/div to 10 V/div voltage scales 

Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 100,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the qualifying event 

History waveform record (History) function, the maximum recorded waveform length is 100,000 frames 

Automatic measurement function on 39 parameters, supports statistics with histogram, Gating measurement, Math measurement, History measurement and Ref measurement 

Math function (2 Mpts FFT, addition, subtraction, multiplication, division, integration, differential, square root), supports math on math 

Search and Navigate 

Digital Voltmeter 

Waveform Histogram 

High Speed hardware-based Average, Eres (Enhanced Resolution) 

High Speed hardware-based Mask Test function, with Mask Editor tool for creating user-defned masks 

16 digital channels (optional) with maximum waveform capture rate up to 1.25 GSa/s, record length up to 62.5 Mpts

25 MHz function / arbitrary waveform generator, built-in multiple predefined waveforms 

Large 10.1” TFT-LCD display with 1024 * 600 resolution; Capacitive touch screen supports multi-touch gestures 

Supports external mouse and keyboard 

10 types of one-button shortcuts

Multiple interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11, telnet, socket, web), Pass/Fail, Trigger Out, 10 MHz In, 10 MHz Out, VGA output 

Built-in web server supports remote control by the LAN port using a web browser 

Supports SCPI remote control commands 


Up to 110,000 wfm/s waveform update rate
Record Length of up to 250 Mpts/ch 
With a waveform update rate of up to 110,000 wfm/s, the oscilloscope can easily capture unusual or low-probability events. In Sequence mode the waveform capture rate can reach 480,000 wfm/s

Using hardware-based Zoom technique and record length of up to 250 Mpts, users can select a slower timebase without compromising the sample rate, and then quickly zoom in to focus on the area of interest

256-level Intensity Grading and Color Temperature Display

Multiple Trigger Functions

Edge, Slope, Pulse, Video, Windows, Runt, Interval, Dropout, Pattern, Qualifed and serial trigger

Trigger Zone
Measurements of a Variety of Parameters

Trigger Zone is available for advanced triggering
Parameter measurements includes 3 categories: horizontal, vertical and CH delay providing a total of 39 different types of measurements. Measurements can be performed within a specified gate period. Measurements on Math, Reference and History frames are supported

Parameter statistics function

Statistics shows the current value, maximum value, minimum value, standard deviation and mean value of up to 5 parameters simultaneously. Histogram is available to show the probability distribution of a parameter.

Advanced Math Function 

Search and Navigate

In addition to the traditional (+, -, X, /) operations, FFT, integration, differential and square root operations are supported. Math on math is available for more complex operations

Hardware accelerated FFT supports up to 2 Mpts operation. This provides high frequency resolution with a fast refresh rate. The FFT function also supports a variety of window functions so that it can adapt to different spectrum measurement needs. Three modes (Normal, Average and Max hold) can satisfy different requirements for observing the power spectrum

History Mode 

Sequence Mode 

History function can record up to 100,000 frames of waveforms. The recording is executed automatically, so that the customer can play back the history waveforms at any time in order to observe unusual events and quickly locate the area of interest using the cursors or measurements
Segmented memory collection will store the waveform into multiple memory segments (up to 100,000) and each segment will store a triggered waveform as well the dead time information. The dead time between segments can be as small as 2 μs. All of the segments can be played back using the History function

Search and Navigate 

Hardware-based Average and Eres Acquisition 

The SDS5000X can search events specifed by the user in a frame. Events flagged by the Search can be recalled automatically using Navigate. It can also navigate by time (delay position) and history frames

Average and Eres (Enhanced Resolution) acquisition modes are hardwarebased, allowing the waveforms to be captured at a faster rate

Hardware-based High Speed Mask Test Function 

The SDS5000X utilizes a hardware-based Mask Test function, performing up to 110,000 Pass / Fail decisions each second. It is easy to generate user-defned test templates in order to provide trace mask comparisons, making it suitable for long-term signal monitoring or automated production line testing
Built-in Mask Editor application helps to create custom masks

Serial Bus Decode 

Waveform Histogram

Display the decoded characters through the events list. Bus protocol information can be quickly and intuitively displayed in tabular form. I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S and MIL-STD-1553B are supported

The Waveform Histogram feature provides a statistics view of the waveform in horizontal and vertical directions

Digital Voltmeter Function

Web control 

4-digit voltmeter and 7-digit frequency counter. Any analog channel can be selected as a source. Bar, Histogram and Trend diagrams are supported

With the new embedded web server, users can control the oscilloscope from a simple web page. This provides wonderful remote troubleshooting and monitoring capabilities.

Digital Channels / MSO (Optional) 

Built -in 25 MHz Function/Arbitrary Waveform Generator (Optional) 

Four analog channels plus 16 digital channels enable users to acquire and trigger on the waveforms then analyze the pattern, simultaneously with one instrument

the SDS5000X can control the SAG1021 USB Function/Arbitrary waveform generator to output waveform with up to 25 MHz frequency and ±3 V amplitude. Six basic waveforms plus multiple types of arbitrary waveforms are built-in

Complete Connectivity 

USB Host, USB Device (USBTMC), LAN (VXI-11, telnet, socket, web), Pass/Fail, Trigger Out, 10 MHz In/Out and VGA output

Spec Comparison




 Real time 

sampling rate

 Capture rate

 Memory depth


 350 MHz


 5 GSa/s (single-channel),

 2.5 GSa/s (dual-channel)

 110,000 wfm/s (normal mode), 

 480,000 wfm/s (sequence mode)

 250 Mpts (single-channel),

125 Mpts (dual-channel)


 350 MHz


 5 GSa/s (single-channel),

 2.5 GSa/s (dual-channel)

  110,000 wfm/s (normal mode), 

  480,000 wfm/s (sequence mode)

 250 Mpts (single-channel),

125 Mpts (dual-channel)


 500 MHz


 5 GSa/s (single-channel),

 2.5 GSa/s (dual-channel)

 110,000 wfm/s (normal mode),

  480,000 wfm/s (sequence mode)

 250 Mpts (single-channel),

125 Mpts (dual-channel)


 500 MHz 


  5 GSa/s (single-channel),

 2.5 GSa/s (dual-channel)

 110,000 wfm/s (normal mode),

  480,000 wfm/s (sequence mode 

 250 Mpts (single-channel),

125 Mpts (dual-channel)


 1 GHz 


  5 GSa/s (single-channel),

 2.5 GSa/s (dual-channel)

 110,000 wfm/s (normal mode),

  480,000 wfm/s (sequence mode)

 250 Mpts (single-channel),

125 Mpts (dual-channel)


 1 GHz


  5 GSa/s (single-channel),

 2.5 GSa/s (dual-channel)

 110,000 wfm/s (normal mode),

  480,000 wfm/s (sequence mode 

 250 Mpts (single-channel),

125 Mpts (dual-channel)

Ordering Information 


3 YRs


SDS5000X Series Digital Oscilloscope 

USB Cable

Quick Start

Passive Probe x 2 (SP3050A for 500 MHz / 1 GHz models)

Certification of Calibration

Power Cord



※ 자세한 사항은 'DataSheet'나 'Quick Start Guide'를 참조해 주세요.      



상품필수 정보

품명 및 모델명 상품상세 참조 제조국 또는 원산지 상품상세 참조
제조자, 수입품의 경우 수입자를 함께 표기 상품상세 참조 A/S 책임자와 전화번호 또는 소비자상담 관련 전화번호 상품상세 참조
법에 의한 인증·허가 등을 받았음을 확인할 수 있는 경우 그에 대한 사항 상품상세 참조



- 배송비 : 기본배송료는 3,000원 (제주도 및 일부 도서산간 지역 추가 배송비) 

     200,000원 이상 구매시 무료배송

- 오후 3시 이전 주문시 당일 발송

- 본 상품의 평균 배송일은 2~3 영업일 (결제 완료 후) 

- 주문 제품 및 특수 제품의 경우 정확한 배송 시일을 별도로 안내해 드립니다.

- 배송예정일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과는 차이가 발생할 수 있습니다.

- 본 상품의 배송 가능일은 결제완료 된 날로부터 2~3 영업일입니다. 배송 가능일이란 본 상품을 주문하신 고객님들께 상품 배송이 가능한 기간을 의미합니다.



교환 & 반품안내


- 특수 제품, 주문 제품 등의 경우, 그 특성상 주문이 접수된 후 취소 및 환불이 불가합니다. 주문 전 충분히 상담하신 후 구매해 주세요. 

- 제품 특성상 주문이 접수된 후 단순 변심에 의한 취소 및 환불은 당일에 한해 가능합니다. (취소 및 환불시 당사 고객센터로 먼저 연락 바랍니다.)

- 전자 제품 특성상 제품포장 개봉 후에는 교환 및 환불이 불가능합니다. (제품 하자 제외) 

- 모든 교환·반품은 수령 후 7일 이내 접수되어야 하며, 접수 전에 고객센터로 문의해 주셔야 진행이 가능합니다. 

- 미개봉 제품의 경우, 받으신 날로부터 7일 이내 접수하시면 교환이 가능합니다.

- 개봉하신 제품은 7일 이내라도 교환이 불가합니다.(제품 하자 제외)

- 배송된 날로부터 7일이 지나면 어떤 교환·반품도 불가하므로 받으시면 제품 상태를 꼭 확인해 주세요. (제품 하자 포함) 

- 소비자 변심에 의한 교환은 왕복 운임을 부담하셔야 합니다.




- 상품 청약철회 가능기간은 상품 수령일로 부터 7일 이내 입니다.

- 주문 제품, 특수 제품의 경우 교환/반품이 어려울 수 있습니다.

- 주문 전 충분한 상담을 하신 후, 신중히 구매해 주세요.




소비자분쟁해결 기준(공정거래위원회 고시)에 따라 피해를 보상받을 수 있습니다.


:: A/S 처리 문의 ::

전화 : 02) 2617-0787



⊙ A/S처리기간은 5일~4주 정도로, 제품에 따라 상이합니다. 


⊙ 무상보증수리 : 제조사의 품질보증 기간에 따라 다릅니다. 무상보증 수리기간은 일반적으로 1년, 3년입니다.

    무상보증수리를 위한 왕복 배송료는 대광계측기(주)에서 부담합니다.

    단, 무상보증기간일지라도 소모품 교체나 소비자 과실일 경우 비용이 추가될 수 있습니다.


⊙ 유상수리 : 무상보증 기간이 지난 제품에 이상이 생겼을 경우에는 유상수리를 하셔야 합니다.

       기본적으로, 수리를 위해 대광계측기(주)로 보내시는 배송료는 고객 부담, 받으시는 배송료는 대광계측기(주)에서 부담합니다.

       타사에서 구입한 제품도 대광계측기(주)에서 수리 가능합니다. 

이미지 확대보기디지털오실로스코프 SDS5000X시리즈

디지털오실로스코프 SDS5000X시리즈SDS5032X/SDS5034X/SDS5052X/SDS5054X/SDS5102X/SDS5104X
  • 디지털오실로스코프 SDS5000X시리즈SDS5032X/SDS5034X/SDS5052X/SDS5054X/SDS5102X/SDS5104X

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.


장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

상단으로 이동